E-BLOCKS 2

There are currently 21 separate circuit boards in the range; from simple LED boards to more complex boards like device programmers and connector boards to give compatibility with first generation E-blocks boards.

E-blocks can be snapped together using the rugged har-flex® connectors, to form a wide variety of systems that can be used for teaching or learning about microcontroller systems, and for the rapid prototyping of complex electronic systems (Matrix TSL).

The 16-bit dsPIC microcontroller programmer connects to a PC via USB to provide a powerful microcontroller programming and debugging platform.

The Arduino Shield connects to a PC via USB to provide a powerful microcontroller programming and debugging platform.

This flexible downstream board is an ideal platform for learning and project development.  The E-blocks2 combo board will work with any upstream E-blocks2 programmer allowing multiple technologies to be explored using a single downstream E-blocks board.

The 8-bit PIC programmer connects to a PC via USB to provide a powerful microcontroller programming and debugging platform. 

The E-blocks2 switch board allows a bank of eight switch inputs to be added to the E-blocks2 system.

The E-blocks2 Prototype board allows for easy addition of custom circuitry into the E-blocks2 system.

The E-blocks2 keypad board allows for simple data entry using an array of switch inputs which can be added to the E-blocks2 system.

The E-blocks Actuators board allows for investigation into several different motor types - a DC motor, a servo motor and a stepper motor.

The 8-bit microcontroller multi-programmer connects to a PC via USB to provide you with a powerful microcontroller and debugging platform. 

The E-blocks2 LED board allow a bank of eight LED indicators to be added to the E-blocks2 system.

The E-blocks2 Alphanumeric LCD Board provides a 20 x 4 character alphanumeric display compatible with the standard HD44780 type displays.

The E-blocks2 Grove Sensor Board allows for the easy addition of a large number of peripherals and sensors from the Seeed Studio range of Grove modules.

This convertor board allows 1st Generation E-blocks upstream boards to be compatible with the various E-blocks2 downstream boards.

The BL0173 E-blocks2 terminals board provides screw terminals that can be used to directly connect wires to an E-blocks2 system.

The E-blocks2 relay board provides two electrically controllable relays which act as isolated switches.

The Raspberry Pi shield allows you to connect a Raspberry Pi PCB computer up to an E-blocks system to provide you with a powerful programming and debugging platform. 

The E-blocks2 click board provides a simple way of connecting a Click module from MikroElektronika using the Mikrobus connection and layout standard. 

The E-blocks2 expander board allows multiple E-blocks2 boards to be connected to a single upstream E-blocks2 port.

This convertor board allows E-blocks2 upstream boards to be compatible with the various 1st Generation E-blocks downstream boards.

The E-blocks2 servo motor board allows up to eight servo motors to be connected to an E-blocks2 system.

The BL0154 SD card board allows a large amount of data storage to be added to the E-blocks2 system.

The BL0161 E-blocks2 patch board allows the various data signals to be re-ordered between upstream and downstream boards.

The E-blocks2 Zigbee board allows you to connect one or more E-blocks systems together using the Zigbee (wireless area network) standard, or to connect your system to a third party Zigbee system.

The E-blocks2 bluetooth board adds fully certified Bluetooth 4.0 functionality to your E-blocks2 system.

The STARM microcontroller programmer connects to your PC via USB to provide you with a powerful microcontroller programming and debugging platform.

The E-blocks2 mono graphical LCD board provides a monochrome graphical display.

The E-blocks2 Wi-Fi board allows the E-blocks system to connect and communicate with an existing Wi-Fi network.

The E-blocks2 CAN bus board allows the E-blocks system controller to connect with other controllers.

The BL0156 E-blocks2 splitter board allows multiple E-blocks2 boards to be connected to a single upstream E-blocks2 port.

The E-blocks2 Zigbee board allows you to connect one or more E-blocks systems together using the Zigbee (wireless area network) standard, or to connect your system to a third party Zigbee system.

The upstream connector board allows one upstream E-blocks2 board to be connected directly to another upstream E-blocks2 board.

Contact

  • Black Facebook Icon
  • Black Instagram Icon
  • Black Twitter Icon
  • Black YouTube Icon